 |
Milled face are available for 22/24/28oz |
- Environment friendly.
- Good elastic force.
- Lighter weight.
 |
 |
 |
| Hickory | Hardwood | ASH |
-
Features of Bamboo: -
PU DEAD BLOW HAMMER Hammer head covered with polyurethane and a dead blow function using steel balls to cushion the shock and reduce recoil. Soft faces that is gentle on the work piece and non-sparking due to no exposed metal. Ergonomic handle in fibreglass with grip in Santoprene.- Soft face, doesn't damage surfaces or equipment.
- Dead blow function uses steel balls to cushion the shock and reduce recoil.
- Ergonomic handle in fibreglass with grip in Santoprene.
- Non-sparking, no exposed metal.
- Flat area on the head for easy pick up the tools.
-
P5 type series (P.U type series suitable for use 16/20oz)
B1 G U L P5 -
99.9% Copper
-
crowned face + round point pick Info: Crowned face, with round point head to remove low spots when metal finishing.
-
Info: Work well on new, thinner sheet metal and moves the metal rather than stretching it. -
MATERIAL: TPR
-
MATERIAL: RED ACETATE -
Z3(Short) X9(Short) -
Features of Bamboo:- Environment friendly.
- Good elastic force.
- Lighter weight.
Hickory Hardwood ASH -
-
DIN5131 Features of Bamboo:- Environment friendly.
- Good elastic force.
- Lighter weight.
Hickory Hardwood ASH 
-
flat face + chisel Info: Cross peen used for working in sharp corners around mouldings and for caulking.
-
Info: Long handle permit many uses in places otherwise inaccessible. Can be work in between reinforcements and outerpanel, then used to pry outward as the metal is dinged. Excellent forming and caulking tool for deep pockets of doors, quarter-panels, rear fenders and lower trunk panel. -
MATERIAL: PP+TPR -
MATERIAL: BEECH -
Features: ● Carbon Fiber core increase 25% bending than normal Fiberglass core. ● Ergonomics design handle, grip end helps to prevent hammer from slipping out of user’s hand.
WE HS -
Features of Bamboo:- Environment friendly.
- Good elastic force.
- Lighter weight.
Hickory Hardwood ASH -
Available in 3 & 5 gauge
P4 V2 SF5 For P4/V2/SF5 type series -
-
-
-
MATERIAL: Rubber , PVC , TPR -
MATERIAL: PP+TPR -
NYLON Tip / Hardness : 74±5 Shore D Features: • Steel body. • Nylon tip. Features of Bamboo:- Environment friendly.
- Good elastic force.
- Lighter weight.
MALLET Mallets have heads and faces made from softer materials, making them perfectly suited to pounding on a variety of materials without denting or damaging them.Hickory Hardwood ASH -
Wood available:Milled face are available for 21/25oz
Features of Bamboo: ●Environment friendly. ●Good elastic force. ●Lighter weight.Hickory Hardwood ASH -
Combi Hammer T-Block Ergonomically designed hammer that increases precision and reduces tiredness. The head is filled with steel balls that dampen shock and reduce recoil. Counterweights in the shaft inhibit rotation.- Ergonomically designed handle that affords good grip along the entire shaft.
- The head is filled with steel ball bearings that dampen vibrations and reduce recoil.
- Counterweights in the shaft inhibit rotation and improve balance and hammer control.
- Replaceable nylon striking face available as a spare.
- Ergonomically designed handle that affords good grip along the entire shaft.
- The head is filled with steel ball bearings that dampen vibrations and reduce recoil.
- Counterweights in the shaft inhibit rotation and improve balance and hammer control.
- Ergonomically designed handle that affords good grip along the entire shaft.
- The head is filled with steel bearings that dampen vibrations and reduce recoil.
- Counterweights in the shaft inhibit rotation and improve balance and hammer control.
-
A2 B1 G J L 
P5 H2 P9 PC -
Head Material : Zine alloy ○NYLON Tip / Hardness : 60~70 Shore D ●TPR Tip / Hardness : 30~40 Shore D ●ACETATE Tip / Hardness : 75±5 Shore DA2 H2 -
flat face
-
-
MATERIAL: TPR -
MATERIAL: BLUE ACETATE -
Features of Bamboo:- Environment friendly.
- Good elastic force.
- Lighter weight.
Hickory Hardwood ASH -
Z6(Long) X8(Long) -
