- Environment friendly.
- Good elastic force.
- Lighter weight.
 |
 |
 |
| Hickory | Hardwood | ASH |
-
Head Material : Zine alloy ○NYLON Tip / Hardness : 66~85 Shore D ●PU Tip / Hardness : 45±5 Shore D Features of Bamboo: -
Head Material : Zine alloy ○NYLON Tip / Hardness : 66~85 Shore D ●PU Tip / Hardness : 45±5 Shore D Features of Bamboo:
- Environment friendly.
- Good elastic force.
- Lighter weight.
Hickory Hardwood ASH -
Info: As inside this hammer the main body is steel structure, and is filled with high-hard steel beads for striking auxiliary and bumping absorption, it can strike accurately and stably.
Further the outside of this hammer is covered with uniquely developed high impact-resistant synthetic rubber which is mainly to prevent sudden crack during application and to prolong the life of this hammer by feature of slow-wearing, especially when it is used in the occasions of acid and alkali. It's features of oil-resistant and oxide-resistan even superior.
The outside covering material of this hammer is especially suitable for operation within wide range of temperatures.
It can usually keep the features of application between-20°C and 50°C.
-
Head Material : Zine alloy ○NYLON Tip / Hardness : 66~85 Shore D ●PU Tip / Hardness : 45±5 Shore D
A1 -
Included: Utility Dolly, Curved Dolly, Hell Dolly, Toe Dolly, Pick & Finishing Hammer, Standard Bumping Hammer, Light Shrinking Hammer (or Heavy Shrinking Hammer) -
Included: Utility Dolly. Curved Dolly, Hell Dolly, Toe Dolly, Pick & Finishing Hammer, Standard Bumping Hammer, Light Shrinking Hammer (or Heavy Shrinking Hammer) -
Included: Double End Hand Dolly, Curved Dolly, Toe Dolly, Drip Moulding Spoon, Straight Pein & Finishing Hammer,Heavy Shrinking Hammer (Standard Bumping Hammer or Heavy Bumping Hammer) -
flat face + chisel Info: Cross peen used for working in sharp corners around mouldings and for caulking.
-
crowned face Info: Designed for fenger and high crowned panel dinging or bumping. Both high and low crowned faces for on or off dolly work.
-
crowned face + blurt point
Info: For low spots in high crown panels and other work with small clearance. -
crowned face Info: For high crown work and finishing, without poking holes in thin sections. It can use on any hard to reach area on inner structure of car
-
crowned face + round point pick
Info: Medium size point an reach for general work.
Low crown strawberry point for perfact balance.